The NTA1000 from QA Cafe is a pre-configured high performance network test appliance optimized for use with CDRouter, the industry’s leading CPE and router functional test solution. The NTA1000 delivers CDRouter in a turn-key solution enabling rapid deployment of CDRouter in any test environment.
A Note About NTA1000 Hardware Versions
The NTA1000 system has evolved from its original version (v1) to v2, v3, v4, v5, and is now at v6. The v6 also comes in a 10G configuration where one wireless card is replaced by a 10Gb/s ethernet card. The v1, v2, v3, and v4 versions are no longer being shipped. This document refers to the sixth version NTA1000 (v6 10G). While all versions look similar, there are some simple ways to tell which one you have from just a visual inspection. If you’re not sure which version you have, please refer to this page:
If you are not using an NTA1000v6-10G system, please refer instead to the appropriate NTA1000 Data Sheet.
- NTA1000v1 Data Sheet (This platform is end-of-life)
- NTA1000v2 Data Sheet (This platform is end-of-life)
- NTA1000v3 Data Sheet.
- NTA1000v4 Data Sheet.
- NTA1000v5 Data Sheet.
- NTA1000v6 Data Sheet.
Throughout the remainder of this document the NTA1000v6-10G will be referred to simply as the NTA1000.
The NTA1000 incorporates eight on-board Gigabit Ethernet interfaces, two 10 Gigabit Ethernet interfaces, and two wireless interfaces, all in a compact 1U form factor.
Compact, high-performance, fully integrated solution pre-qualified and optimized for use with CDRouter.
Supports all CDRouter add-ons, including CDRouter Performance, CDRouter Multiport, CDRouter TR-069, CDRouter TR69-EDM, CDRouter BBF.069, CDRouter IKE, CDRouter IPv6, CDRouter ICS, CDRouter DOCSIS, CDRouter USP, CDRouter Storage, CDRouter Nmap, and CDRouter SNMP.
Supports a wide variety of test configurations, including simultaneous connectivity of seven Ethernet connections and three 802.11 wireless connections.
|CPU||Intel® Core™ i7-7700 CPU @ 3.60GHz|
|Chipset||Intel® C236 PCH Chipset|
|Memory||64GB DDR3 2133 MHz|
|Storage||Samsung 970PRO 512GB (OS), Western Digital WD4005FZBX 4TB (data)|
|Wired LAN||(8) 10M/100M/1G Ethernet interfaces: Intel I210 (rev 03), (2) 100M/1G/2.5G/5G/10G Ethernet interfaces: Intel 10G X550T (rev 01)|
|Wireless LAN (wifi0-ac)||SparkLAN WPEA-352ACN, 802.11 a/b/g/n/ac, Atheros AR9880 dual-band 3x3 mini-PCIe with external antennas|
|Wireless LAN (wifi2-ac2)||Compex WLE1216V5-20, 802.11 a/n/ac-wave2, Atheros AR9984 5GHz 4x4 mini-PCIe with external antennas|
|I/O||(2) front panel USB 3.0 ports; (1) rear panel VGA port|
|Expansion||(2) PCIe expansion slots (rear) populated with (7) RP-SMA antenna connections (left four: wifi2-ac2, right three: wifi0-acn), (2) 100M/1G/2.5G/5G/10G Ethernet interfaces|
|Operating System||CentOS 7.6 (64 bit)|
|Applications||Pre-installed with the latest release of CDRouter|
|Chassis||Compact 1U with front panel I/O|
|Dimensions||(W x D x H): 438mm (17.24”) x 422 mm (16.61”) x 44 mm (1.73”)|
|Weight||6.8 kg, 15 lbs|
|Power||Full-range 250W ATX power supply (100-240 VAC, 50-60 Hz)|
Quick start guides
Please refer to the Quick Start Guide in order to get your NTA1000 up and running.
Normally, there is no reason to have to rebuild either of the internal disks. However, due to a disk failure or software corruption, etc., it may be necessary to restore either or both disks to their factory defaults. In addition, QA Cafe may create new disk images from time to time that feature updates to the underlying system (separate from CDRouter updates). If you need to rebuild either of your disks for any reason, you can find detailed instructions on how to do this here: