rvrThresholdPct
Value Type
double
Minimum Value
0.0
Default Value
100.0
Description
This testvar to adjusts the throughput thresholds for the RvR (Range v Rate) test modules. This value affects all tests in all RvR modules.
This value is a percentage.
Set this to a value of none (default) or 100 for no change.
A value greater than 100 will increase the thresholds, resulting in a higher performance requirement.
A value less than 100 will decrease the thresholds, resulting in a lower performance requirement.
This testvar was added in CDRouter 15.7