This testvar’s default value is computed dynamically and may not always be the value below. Please see the testvar’s description for details.
This parameter specifies a free IPv6 address used for WAN-side performance tests. This IP will be performance server’s IPv6 address. This IP address must be on the same network as the DUT’s WAN interface and next-hop gateway.
If not defined, this testvar defaults to the next address after ipv6WanIspNextIp. For example, if wanIspNextIp is 3001::3 then perfWanIpv6 would default to 3001::4. (If ipv6WanIspNextIp is also not defined, check its description to determine its default value.)
This testvar was added in CDRouter 9.3