rfAttenuationDb

Value Type

double

Also-Accepted Values

none

Minimum Value

0.0

Maximum Value

100.0

Default Value

none

Description

This value specifies an attenuation value in decibels (dB). This value is used to configure the attenuation for the interface in this LAN group.

This value is set on the attenuator during the startup procedure. It is reset during shutdown (final). Any tests that depend on specific attenuator values (e.g. RvR) will clear and reset this value at the beginning and end of the test, respectively.

NOTE: This value is only valid for wireless interfaces, and will be ignored for ethernet interfaces. Also note that the wireless radio must be properly cabled through the attenuator.

This testvar was added in CDRouter 15.8