Which EAP types are supported for each LAN security mode?
CDRouter uses the testvar lanSecurity to define the security mode implemented by the DUT on the LAN. For wireless interfaces the lanSecurity testvar supports the following modes:
- WPA: WPA, WPA2, or WPA3 (Enterprise or Personal)
- WEP: static WEP
- NONE: no security
For Ethernet interfaces the following modes are supported:
- 802.1X: wired 802.1X
- NONE: no security
For security modes that require 802.1X, certain EAP types, as configured by the testvar eapType , may or may not be supported. The table below defines which EAP types are supported for each LAN security mode.
LAN Security Mode | eap-tls | eap-ttls | eap-md5 | eap-peap | eap-aka | eap-sim |
---|---|---|---|---|---|---|
WPA |
Yes | Yes | No | Yes | Yes | Yes |
WEP |
No | No | No | No | No | No |
NONE |
No | No | No | No | No | No |
802.1X |
Yes | Yes | Yes | Yes | Yes | Yes |