triggerPort

Value Type

port-list

Default Value

This testvar must be explicitly defined in the configuration file

This testvar can appear multiple times in a configuration file. Each instance must take the form triggerPort with starting at 1. Up to 4096 instances of this testvar may be defined.

Description

This parameter specifies the LAN port that will trigger this rule. Note that a range of ports can be specified by separating them with a dash. Likewise, multiple individual ports can be specified by separating them with a comma. When the specified type of traffic is sent from a host on the LAN the DUT should open the public port on the WAN for TCP or UDP connections.

Some trigger port example configurations include:

GNUtelle

Name: GNUtelle LAN Port: 6346 LAN Type: tcp Public Port: 6346 Public Type: udp

QuickTime-4-Server

Name: QuickTime-4-Server LAN Port: 6970 LAN Type: tcp Public Port: 6970-7000 Public Type: udp

After defining an instance of this testvar, you may also define the corresponding instance of the following testvars: triggerAddrType, triggerName, triggerPublic, triggerPublicType, triggerType